Pitsford Water anticlockwise

Led by Mel. Barrie, Vera, Terry, Steph, Norma, Chris, Phil and me. Foggy start, then fine and sunny. Lunch at The Willow Café. Around 7 miles.

The mist begins to lift

Coffee break - I want to see everyone's face.

Sparkling Light for the Fourth

July 4th 1981. Digitized ... Copyright © 1981/.. by Rebeckah R. Wiseman Hope you have a safe and enjoyable holiday!

The Art of the Ride Report: a Touring Bicycle Give-Away

Thinking about the best way to give away the refurbished vintage touring bike "for women who fear roadbikes," I kept coming back to the connection between cycling and the Ride Report. If you've spent any time browsing blogs and websites about bicycles, you are no doubt familiar with the genre. While at its most basic level, a ride report is simply a description of a bicycle ride, it is really so much more. Some are infused with a seriousness and depth of analysis that is normally reserved for historical descriptions of war battles. Others are light-hearted and hilarious. Others still are impressively dull, filled with endless lists and technical descriptions. A Ride Report can resemble a travelogue, a parable, a newspaper article, or an entry in a physical fitness diary. A Ride Report can be self-aggrandising or self-depricating. A Ride Report can describe a 1,000 mile tour or a 1 mile trip to the grocery store with equal degrees of drama and suspense. At the heart of it, a Ride Report tells us less about the ride itself than about the cyclist - and the cyclist's relationship to their surroundings, their bicycle, and the very experience of riding a bike.



Not all of us excel at the Ride Report. I for one can seldom think of anything interesting to write about the rides I take - possibly because I space out and daydream through most of them! But a good Ride Report is a thing of beauty, and so I invite you, challenging as it may be, to try your hand at it. Here are the rules:



Submission Rules

In a narrative style of your choosing, describe a bicycle ride that is memorable or significant to you. It can be any sort of ride - transportation, recreation, sport, whatever. Please limit the length of the writing to what would constitute a typical blog entry. Accompanying images are a plus, but not required. Submit your Ride Report either by putting it online and posting a link to it here (preferred!), or by emailing a document to "filigreevelo at yahoo" with the subject header "Ride Report." You are welcome to submit even if you are not entering to win this bicycle. I will compile a sampling of entries and post it for everyone to enjoy. Submission Deadline is 18 September, .



Give-Away Details

With the support of Harris Cyclery, Velo Orange, and a number of my readers, I am giving away a refurbished vintage touring bicycle to a woman who might benefit from it. Pictured above, this bicycle is described in elaborate detail here. Please read that post carefully to decide whether the bike is for you, and feel free to ask any questions in the comments here.



The bicycle is a 52cm frame with 27"x28mm tires and a longish top tube. It is best suitable for persons 5'6" - 5'8", depending on your proportions and how high you like to set up the saddle. The dusty-lilac, early 80s Japanese cro-moly frame is in "good" used condition. It is fitted with mostly modern components (Velo Orange, Nitto, Tektro, MKS, etc.) and iscompleted with fenders, a bottle cage, a saddlebag and a small air pump. The frame has comfortable relaxed angles, and no toe overlap. The bicycle is a 12-speed. For additional details and lots of pictures, once again please see this post.



This bicycle was built up with a female in mind. The ideal candidate is a cyclist who would like to ride a bike with drop bars, but has found roadbikes difficult, painful, intimidating, or otherwise problematic. The bike being given away is more tame than what you are likely to find on the market today, be it new or secondhand, without spending a fortune, and I hope that it will allow someone out there to enjoy a new form of cycling by easing into it gently and gradually.



Once again, the entry deadline is 18 September, . Good luck, and thank you for taking part!



[Edited to add: The recipient has now been announced here. Thank you everyone for taking part!]

Petzl Nomic Review..Old vs New

Colin Haley photo of Bjørn-Eivind Årtun on their new route, Dracula, Mt Foraker, June .



"The old Nomic and a pair of C-T hammers"

















Up front...the old Nomic is every bit the equal for climbing difficult ground as the new Nomic.



No need to panic.



Major change on the new Nomic? It is the new pommel that has a serrated stainless blade. It will add some stability on hard ice and can be used to give the pommel some stability as a cane on easy terrain. Better yet just use the top of the Astro or Dry pick while reversing the tool in that same easy terrain. Not suggested by Petzl but the new pommel can be retro fitted to the old Nomic. Just bolt it on...no issues what so ever.



Biggest over all improvement? New pommel fits bigger hands and thicker gloves much, much better. But it can be bolted right on no fuss, no muss to the older tools if that is something you want to try. The new Pommel offers a tiny bit more support and more coverage and hand protection on the upward curve towards the ice. Maybe the most important improvement is a metal to metal interface where they mate up on the end of the shaft. BUT...the metal to metal female/male fittings have some slop in the mating surfaces so they move backwards and forwards a bit even when cranked down tight . That is not an improvement. You won't get every advantage of the size improvements for big hands using the new pommel on the old tools but a good bit of it. Worth buying that piece of kit and trying it on your old tools. It is an option now.



I don't like the serrated blade in some places on hard technical climbing...it gets in the way during extreme rotation. I put the old pommel on my new Ergos because of it. But I do like having the option.



Hammer and adze? Yes you can add either the hammer or the adze designed for the new Quark to the Nomic. A small bit of round file or Dremel work to the tool head will allow you to fit the new Petzl hammer to the old style Nomic head. (see the detail photos below) But why would you? Needing a hammer is one thing, using the one Petzl made for the Quark is another. There is a better answer that is about to get even better shortly. That would be the Cold Thistle, 4mm, Nomic hammer. If it was not a LOT better than Petzl's offering I wouldn't bother making it. C-T hammers will also be much, much easier to change in the field using the newest Petzl picks or older style picks we cut for you. And the C-T hammer will fit the old and the new Nomic head with NO changes. Having it difficult to fit the hammer or change picks with the required spacer is a down side to the newest Petzl pick/hammer design. The new pick and spacer is truly a bitch to change in the field if the pair of Nomics I have here is any example.



C-T hammer info and pricing can be found in this link:



http://coldthistletools.blogspot.com//08/ice-climbing-gear.html





The new umbilical attachment? Good move on Petzl's part but if you want it to hold more than TOOL weight on your umbilicals you need to do a small mod on the newest Nomic's pommel. There isn't enough clearance between plastic and aluminum to get even 3mm cord through which you'll need to opened up for 4mm + cord. The hole Petzl drilled in my samples are 5.9mm. But these samples had some threads showing internally which will need to be taken out if you want to use 4 or 5mm cord there. The edges of the hole are well chambered on these but I would check that as well and do it if there is a sharp edge on either side of the shaft. Easy enough to drill out and chamfer the hole. I like 5mm cord there because you always know what the knot will do and it is easy to inspect cord for wear. Again easy to modify the older Nomic and now even easy enough to modify the new Nomic as well.



After cutting up the pommels on my first new set of Nomics I might modify these a bit different the next time around and cut up the grip a bit instead of going under the pommel. Looks like to me that you could now easily run a cord from the full strength hole in the handle and go behind the new smaller pommel. Done right it might be a better answer. I'm undecided at the moment. But the new tools are easy to cut with a Dremel or a round file where I used a vertical milling machine on the original Nomic's pommel. The best answer on the new tools is still a work in progress. What ever the answer the factory version isn't it for me.



New picks...DRY and ICE? Same materials, same heat treat, slightly different designs from the Astro and the Cascade. Still great picks...all still 3mm tips. Now rated as T picks instead of B picks. Little or no change in strength more likely just the label. Truly awesome picks, old or new!

Old picks fit new tools, new picks fit old tools. New picks require a spacer...which is a major PAIN to replace in the field. Buy the old Astro or Cascade if you need to carry spares and think you'll break or bend a pick or need to replace them on a climb. I like the original Cascade pick design on pure ice better FWIW. Either way buy the old picks because they are easier to replace and no spacer required if you aren't using a hammer.



Is it worth selling your old Nomic to get the new one? Obviously not....no way in fact. Worth making a few mods on either tool to suit your own climbing...you bet.





My old Nomic and umibilical about to pull a bulge on Curtain Call





































Here are the details:





Tool weights:



old shaft 366g (+4g)

new shaft 362g





pommel old 20g (-4g)

pommel new 24g





old Cascade pick w/weight 188g (+8g)

new Cascade pick w/weight 180g





Old Nomic is 8g heavier with the old pick design. Old Nomic is the same weight with the new "ICE" pick design.



8g = 1.4 oz. Dbl click the pictures for the details where required.









































































































































My undying, loyalty, respect and appreciation to Daniel Harro for loaning me his new Nomics for this review :) But..... you'll need to get in line for the hammers!





The link below is worth a read as well.

http://cascadeclimbers.com/forum/ubbthreads.php/topics/947206/Re_New_Nomic

Easter!!

May you have Egg-zatly the kind of easter day you want. Make sure it is a good one.
Happy Easter one and all.

Want a Drink?

Traveler drinking from the water hose while getting his bath. He did a lot better than I expected for his first one. Me, I just look really hot and tired. And I was.

Thank You, Family Tree Magazine

Early this afternoon, I took a break from research at the Family History Library and checked in on Facebook. There I saw a couple of mentions about Family Tree Magazine'sTop 40 Genealogy Blogs in .. so I clicked through and started reading the article. I was amazed and honored to find that Kinexxions had made the list in the "Story Time" category!



There are many fine genealogy blogs being written and it had to have been difficult to pare it down to just 40. I know I'd be hard-pressed to come up with such a list. But, like Randy at Genea-Musings, I was surprised to see some very excellent blogs missing. Congratulations to all of those who are listed.



For new visitors here, the post written in January for the 6th anniversary of Kinexxions, Now It's Six, provides links to the "year end" roundup posts and will give you some idea of what's been written in the past. Posts have been somewhat sparse thus far this year but more will be coming in the near future.



Thank You, Family Tree Magazine. I appreciate the honor and the recognition.

Father of Eva Rupert :: Is it John or Adam?

Online trees are certainly a “mixed bag” when it comes to reliable information but sometimes you find a gem that provides a clue or lead to follow-up on. Such was the case with the WorldConnect database of another descendant of Conrad and Eva/Eve (Rupert) Yarian. Her parents were given as John and Barbara Rupert and it had a source for her baptism - the Lower Bermudian Church in Adams County, Pennsylvania.



From her modern gravemarker in Unity Brick Church Cemetery, Columbiana County, Ohio we know that Eve was born on December 21, 1786. In addition, the 1850 census gives her age as 64, and in 1860 she is 75 years old. In both census records (Unity Township, Columbiana County) her birthplace is given as Pennsylvania.





Photo taken September 19, .. by Becky Wiseman

A resource I had found in the early days of my research (forgotten but recently reviewed) was a short typewritten manuscript titled “Some Descendants of Mathais Jurian” (compiled by Miss Cecil M. Smith, Hollis, New York, no date) It has two slightly conflicting dates for Eve's birth. On page 6 her birth is given as December 24, 1786 while on the next page it is given as December 21, 1786. It also states that Eve was born in born York County, Pennsylvania. (Keep in mind that in 1800, Adams County was formed from part of York.)



A search of the Library Catalog showed that the 1943 typescript “Church record of the Reformed & Lutheran congregation at Bermudian, Latimore Township, Adams County, Pennsylvania, 1745-1864” by William John Hinke was available on microfilm.





The last entry on page 21 shows [Infantes] Eva b. Dec 21, 1786 bapt. --------, 1787[Parents] Hannes Rubbert and Barbara, [Testes] John Adam Rubbert and Margaret



Having looked for these people “out there” on the internet recently, I've found a lot of conflicting information. It seems some researchers think that John Adam Rupert and John Rupert are one and the same person. Of course, without further research into Pennsylvania records I can't say conclusively that this Hannes Rubbert (John) with wife Barbara and John Adam Ruppert with wife Margaret shown here in Adams County, Pennsylvania are the same individuals who lived in Columbiana County, Ohio. But I can say that Hannes and John Adam are definitely two separate individuals!





The first entry on page 22 is the birth of Johannes born Nov. 9, 1786 to Johannes Adam Ruppert and Margaretha with witnesses Hannes Ruppert and Barbara.



The fifth entry on that page (the last entry on the scan) is the birth of Anna Catharina born Febr. 23, 1789, bap. Apr. 13, 1789 with parents Adam Rubbert and Margaretha and witnesses Henrich Flliker and Christina.



Other family trees on the net (from some of the researchers who don't subscribe to the premise that John and Adam are the same person) show four brothers - Adam, John, Martin and Michael Rupert - with unknown parents. The first three reportedly all ended up in Columbiana County, Ohio at the about the same time.





This record is from page 71 of the Bermudian Church Records showing the birth of a son Johannes on Jan. 29, 1780 bapt. on May 14, 1780 to Martin Rupert and Elisabeth with witnesses being Peter Arnold and Margret. Is Martin one of the four brothers?





On page 73 we have the birth of Jacob on June 1, 1782 bapt. June 23, 1782 with parents Johannes Ruppert and Barbara and witnesses Georg Hermann and Apollonia.





On page 74 of the Bermudian Church Records is the birth of Salome on Nov. 5, 1782 and bapt. in 1783. Her parents were Johannes Ruppert and Barbara with witnesses being Felix Thiel and Elisabeth. As a side note, this record was on a page with births for both 1782 and 1783. It is highly unlikely that Salome was born in November 1782 if Jacob was born in June of the same year. This is a transcription of the church book so the record could have been copied incorrectly or the church cleric could have inadvertently written the wrong year.





As a final “exhibit” from the Bermudian Church Records is page 101 listing the “Communicants, 18th Sunday after Trinity, 1787.” In the first column at number 23 is Johannes Rubbert, number 24 is Barbara, wf. In the second column is number 30, Adam Rubbert.



Among other sources that I reviewed on microfilm (No. 317346) at the Family History Library was “Wills of Columbiana, Mahoning and Trumbull counties” compiled by Henry R. Baldwin, no publication date. I didn't find a will listed for John Rupert but did find an abstract for that of Adam Rupert.





This is a snapshot taken with the camera. The record refers to Book 10 page 376 with a year of 1838. Heirs of Adam Rupert were his wife Margaret, sons John and Adam, daughters Catherine married John Sheets, Margaret married Adolph Saschtebergen, Mary married John Snoke (Snook), Elizabeth married Henry Sentzenisen. Grandchildren (Sentzenhisen) May, John, Daniel, Adam, Jacob, Samuel, Benjamin, Margaret, Sitter, Eliza, Ester, Henry, Lewis. Executors were John Sheets and Adam Rupert. Witnesses were William Chain and Solomon Greenamyer.



Note that Adam's wife is Margaret and there is a son John and daughter Catherine, corresponding with the Bermudian Church records.



Armed with this information and hoping to find something to help verify that John Rupert was the father of Eve, I began looking at land records for Columbiana County, Ohio.

No More Tears: Clear Glasses for Winter

One of my biggest problems cycling in the winter used to be my eyes tearing up. It would get so bad, that the constant flow of tears would blur my vision, making it hard to see where I was going. But like many cyclists, I soon found the solution: clear glasses or goggles.




On moderately cold and windy days, I wear simple resin glasses that I am very happy with. They are unbranded, so I don't have an online source to refer you to, but many bike shops around here sell them at the counter. I bought mine from the Wheelworks, for around $20. What I like about these particular glasses is how comfortable they are, even on long rides. They sit sturdy, but are lightweight and don't press into my face or temples. The lenses are durable and the clarity is good.




On particularly freezing days with harsh winds, I wear these wrap-around safety glasses from MSA. They cost only $4 and perform double duty as shop safety glasses for framebuilding. The MSA glasses are wonderful for creating a seal from the cold, keeping my eyes warm and dry and the sensitive skin around them protected. An additional benefit for those who wear prescription glasses, is that these can be worn over them. The downside is that they are on the heavy side, and if I wear them for too long they give me a headache - so watch out, if you have issues with that. But for short rides they are excellent, and on days that are cold enough to necessitate them my rides are on the short side anyway.




If you prefer the high-end route, I've tried and really liked the clear version of the new Lazer Argon glasses. These are in the $80-90 range and come with interchangeable lenses, which can be replaced with tinted ones. Oakley, Rudy Project, and most other athletic sunglass manufacturers also make clear or photochromic versions of many models.




While some cyclists like to wear goggles, I am not a fan: They snag my hair and don't seem to stay put as well as regular glasses if I wear them on the bike. I find that the MSA safety glasses provide the same coverage but with less fuss.




There are many inexpensive options out there for clear goggles and glasses, so try a few and see what works. And if you need more coverage? Well, a few days ago I saw a man cycling with a clear face shield. Perhaps a new fashion trend in winter cycling.

Pigeon River Otters

Jessica and I were kayaking on the Pigeon River the other day when we had an incredibly fun experience with an Otter family! We were exploring the small islands in the wide part of the river just downstream from the rapids below High Falls. Jessica was paddling ahead of me and I was looking down a channel between two of the islands when I heard Jessica say in a loud whisper "There's otters right over there!" I looked and sure enough, not more than 25 feet off the bow of her kayak, a family of otters wasswimming around against the bank along the side of the river. I slowly paddled over to get a closer look. They didn't seem bothered by us at all, probably because they are used to boats in this section of the river (it is a popular area for local fishermen). We watched them for a minute or two then realized that there was one otter that was a lot smaller than the others. The little one was adorable as he/she bobbed up and down in the water, trying to get a better look at us. We enjoyed their company for about another 10 minutes then they all swam off down one of the channels in between the islands. We were glowing from the experience as we paddled back to the boat landing :-)

A Gift From a Stranger :: Dressler Family Photograph

A few days ago I received a pleasant surprise, delivered to my email inbox. Normally, I don't open email messages with attachments from someone I don't know but the subject of the email enticed me and I thought it would be okay. The subject? "Four Generation Picture of John Jr., John Gilbert, Joseph and Arthur Dressler."

The email was from Marla Duncan who is a great granddaughter of Anna Ellen Dressler. Anna was a sister to John Gilbert Dressler, who was the first husband of Ida Joslin. She had found my blog post on Ida Joslin Dressler Lewis and the letters Ida had written to her sister, Malissa Joslin Brubaker Bower, (May 1, 1899, November 1934, December 1934, January 1935, Fall of 1936). So, Marla isn't related to me in any way (at least, not that we know of). Even though the people in the picture aren't my ancestors (half of them are related though), I'm still excited to be able to add it to my family history documents.

Marla didn't have any information on Joseph, other than what was written on the back of the photograph. She was thrilled with the information I had posted and thought I'd enjoy having the photograph. Oh, yeah! She said, "I feel like a kid in a candy store!!" Marla has graciously given me permission to post the picture and include her name in this post. It is nice to be able to publicly acknowledge her. Thank you, Marla.

That is why I write about my family history and post it here and elsewhere on the Internet. Not just the ancestors, but about the siblings as well. If you don't put it "out there" no one is going to find it! And I firmly believe that descendants of siblings of our ancestors hold many of the clues we are missing in the search for our family history.

Four generations of Dressler men. Clockwise starting with the young man standing in the back: Joseph, John, Arthur, and John Dressler.

Written on the reverse:
Joseph Dressler son of John Dressler born at Dorrance Ks.
John Dressler son of of John & Sarah Dressler.
John Dressler - Mothers father, born in Pennsylvania, Dec. 3rd 1818. 92 I believe on this date of picture.
Arthur Dressler son of Joe & Belva Dressler, born in Dorrance Ks. Now of Mountainair, New Mexico.(In lower right corner): Gertrudes Picture

=+==+=

Joseph Gilbert Dressler, the young man standing in the center of the picture, is my 1st cousin 3 times removed. His mother, Ida Joslin, and my 2nd great grandmother, Malissa Joslin, were sisters and they were two of the 15 children of Lysander and Lydia (Robison) Joslin.

The only clue I had regarding the whereabouts of Joseph Dressler was in Ida's obituary which stated that a son, Joseph, lived in New Mexico. The letters written by Ida provided some clues as well. When the census indexes became available online it was a relatively simple task to locate him. In September .., a query to the webmaster of the Torrance County, New Mexico website put me in contact with a grandson of Joseph Dressler. I sent him the information I had found but never heard back from him. And then, as often happens, life got in the way of research, and I never followed up.

From my .. conversations with the grandson of Joe I learned:

Joe and Belva had two sons and a daughter: Chester, Arthur and Lola. Chester and his wife Pearl had one son, Eugene (Gene). Arthur had two daughters and Lola married Irvin Taylor and had two sons.

Joe Dressler's real mother left him and his Dad when Joe was about three years old and he never had any contact with her again until after his Dad died. The grandchildren do not know the name of either Joe's father or mother. After Joe's father died the mother came to see Joe and he thought maybe she even came to New Mexico at least once, maybe twice. When she died Joe went to Kansas and took care of the arrangements. Joe was the only child she ever had, but he never had much contact with her. Joe just never talked about his family. Belva talked about hers a lot and her maiden name was Roe. She was Republican and Joe was a very strong Democrat. Joe was the probate judge for Torrance County for several years.

A portion of a letter from Ida to Malissa in the fall of 1936:

...I guess it made you sadder to bid your boy goodbye forever. I don't know as I will ever see Joe again although he always says he will come when he can get away from his farm. I wrote him it would be too late if he kept putting it off but I know its hard to get away from the farm. He is not well. Neither is his wife. Just working themselves to death - children all worried. Still they don't seem to know how to let up. They always say - "just one more year" - but they keep right on. The youngest boy, with his family, lives on Joes farm. He built a house for him. The other one not far away but Lolo is the one Be--- wants near her but she is a long way off. Only comes every year but she seems happy with her husband and two boys. Guess she won't have any more. I hope not. The youngest is 3 ½ - the other one 6 - going to Kindergarten. Lolo gives them a good start as she taught school several terms before she married Ervin.

=+==+=

Joseph Gilbert Dressler was born February 24, 1885 in Kansas (in Dorrance, according to the photograph) and was the son of John Gilbert and Ida Blanch (Joslin) Dressler.

Joe is listed in the household of John G. Dressler in the 1880 census (Plymouth Township, Russell County, Kansas page 72): Joseph G. Dressler, son, 15 years old, born Feb. 1885 in Kansas. His father was born in Pennsylvania and his mother was born in Indiana.

In the 1910 census, Joseph G. Dressler was found in Dorrance City, Plymouth Township, Russell County, Kansas (page 80B/3B). He is 25 years old and has been married for 6 years. His wife, Belvie L., is 25 years old, has 2 children (both living). Residing with them are their 4 year old son Arthur and daughter Lola, who is 3 years old. Also in their household was his 36 year old brother-in-law William Roe and his 21 year old cousin (female) Ollie Mackle.

In 1920, Joe and family were found in Precinct 17, Jaramillo, Torrance County, New Mexico (page 268/1A). Joseph G. Dressler, owns his home, is 35 years old and married. Also in the household were his wife Belva L., 35; son Arthur G., 14 6/12; daughter Lola L., 12; and son Chester E., 10 7/12.

They were still living in Torrance County in 1930 (Ewing Precinct 17, page 84) but by now the children were out on their own. Joe was 45 years old, he was first married at age 19. He was born in Kansas, his father was born in Pennsylvania, and his mother was born in Indiana. His occupation was listed as a general farm laborer. Listed with him was his wife Belva R., age 45.

Joseph and Belva are buried in Mountainair Cemetery, Torrance County, New Mexico. According to the tombstone picture, Joseph was born February 24, 1885 and died December 15, 1961. Belva was born March 21, 1885 and died January 9, 1967.

=+==+=

Arthur has not been found in the 1930 census. There is a record on the SSDI that shows an Arthur Dressler whose social security card was issued in New Mexico. He was born July 26, 1905 [probably Dorrance, Russell County, Kansas] and died in March 1976. His last residence was listed as Thousand Oaks, Ventura County, California. A search of the California Death Index, 1940-1997 on ancestry shows that Arthur G Dressler was born July 26, 1905 in Kansas and died March 20, 1976 in Los Angeles.

The California Marriage Index, 1960-1985 on ancestry has an entry for Arthur G Dressler, age 56, born about 1905. Married on November 11, 1961 in Los Angeles to Viola M, age 47, born about 1914. Her surname is given as Clark on one page and Hucke on another.

=+==+=

Lola Dressler and Irvin Taylor were found in the 1930 census in Township 5, Inyo County, California (page 288): He rents their home for $12.50, they own a Radio. He is 28 years old and was married at age 28. He was born in Texas and works as a laborer at a Clay Mill. His wife, Lola E., is 23 years old, was married at age 22, and was born in Kansas. No occupation is given.

The family listed just before Lola and Irvin was that of 26 year old Cyrus O. Taylor who was born in Texas. Presumably a brother of Irvin.

A search of the California Death Index, 1940-1997 on ancestry resulted in a match for Lola Elnore Taylor, born January 20, 1907 in Kansas. She died March 1, 1983 in Los Angeles. Her mother's maiden name was Roe and her father's surname was Dressler.

In the letter, mentioned above, from the fall of 1936 we find that Lola has two boys: the youngest is 3 ½ and the other one was 6 years old.

A check on WorldConnect found Lola Dressler born January 20, 1907 in Kansas and died March 1, 1983 in Los Angeles, California. She married Samuel Irvin Taylor. He was born May 4, 1901 in Edwards County, Texas and died April 18, 1975 in Kern County, California. His parents were Arris Samuel Taylor and Laura Clazona Roberts. No sources were given.

=+==+=

Chester Dressler was located in the 1930 census in Ewing Precinct 17, Torrance County, New Mexico (page 84). He was 20 years old, was married at age 19, born in Kansas, and was a general farm laborer. His wife, Pearl, was 20 years old and born in Oklahoma.

The SSDI shows that Chester was born June 6, 1910 and died in April 1983. His last residence and last benefit was listed as Mountainair, Torrance County, New Mexico. His social security card was issued in New Mexico. Chester lived on the family farm and it was his son with whom I made a brief contact back in ...

=+==+=

Cranford St Andrews - Burton Latimer - Cranford St Andrews

Led by Barry. With Gordon, Eddie, Terry, Jill, Carol, Ian and me. Beautiful sunny warm day. A lot of fields and three busy roads to cross. Same walk as this one last November, but in reverse. 7.3 miles.



We set off from Top Dysons, crossed the road and went past the Old Forge tea-rooms along Grafton Road to the right.

Soon the footpath took us off the road to the left. We turned to our right whenanother path crossed ours, and followed this to the south eastern corner of the field, then south and east and south again before coming out on Church Lane and Cranford High Street. We walked along this for a while, then followed the path right to the edge of the field and steps down to the A14. Patience needed to cross this. Luckily there is a division in the middle of the very busy road.





Banana break! A shady, though not scenic spot.













More later.

Climbing and skiing, and advice on cell phone use

If you haven't noticed, few posts means lots of work and activity here at Mount Rainier. The weather has remained stellar over much of the past week and things have been busy. During this period, climbers and skiers have been tackling the mountain from all directions. Of particular interest are new and extensive reports for Liberty Ridge, Ptarmigan Ridge and the Fuhrer Finger (photos included).

It seems that a few people are just itching to be rescued or call 911. We've had a number of "alarms" or "callouts" over the past few weeks, thankfully nothing has been serious! That said, one callout is in progress and involves a 2 person team pinned down in a whiteout on Liberty Ridge near 13,700 feet. We suspect that they will be fine, as they are well prepared for 2 more days on the mountain. As a reminder, if you carry a cell phone, make SURE you call 911 during an incident or emergency, not your family members.

On the other hand, two separate teams had somewhat serious accidents but self-rescued. Neither of those teams used a cell phone to alert friends. One incident involved the skier who fell 300 feet on the Emmons Glacier last weekend. A more recent event involved a 2 person team on the Kautz Glacier. One member dislocated his shoulder while descending (balled up crampons). As a reminder, we're still working on that streak of NO NEW MAJOR RESCUES since 2005. We hope to continue this trend...

First photo is by Josh Farris near 12k on Ptarmigan Ridge; the second is of a climber on Liberty Ridge by Dmitry Shapvalov.

Rainier After the Storm!

After receiving nearly 8 ft. of snow over the past week at Paradise, the mountain is looking particularly PHAT!(View from the Tatoosh)

Wordless Wednesday :: Schooldaze ~ Twelfth Grade

Owachomo Bridge, Newspaper Rock, Goosenecks State Park

Staying in Blanding, Utah tonight. After a day filled with sunshine, spotty rain, occasional snow showers, and some pretty good dust storms (not to mention some REALLY cool clouds throughout the day), I caught a nice sunset over Owachomo Bridge at Natural Bridges National Monument. Was hoping to photograph some stars over the same bridge, but it was too cloudy.



Some other highlights from today: Stopped by Newspaper Rock in Canyonlands National Park, an amazing rock which has probably the highest concentration of petroglyphs of any single rock in the Southwest. I also drove through some intense rain today, followed by some amazing skies as the storm broke up. As I drove North from Monument Valley I took a quick side trip to Goosenecks State Park to photograph the sky above the bends in the San Juan River.

Pinched Moon

I was leaving work today when I noticed the full moon rising over the Pigeon River. The moon was so big and clear that I had to take a picture of it. This Birch tree is right behind our visitor center at work and I noticed that the moon was lining up with the tree and it looked like two fingers "pinching" the moon. Pretty cool :-)